Approximate Weight |
20,600 lbs. (9,344 kg) |
Working Width |
16 ft. 4 in. (5.0 m) |
Transport Width |
17 ft. 9 in. (5.4 m) |
Transport Height |
13 ft. 4 in. (4.1 m) |
Front Gang Width |
16 ft. 10 in. (5.1 m) |
Rear Gang Width |
19 ft. 10 in. (6.0 m) |
Number of Disc Blades – Front |
22 |
Number of Disc Blades – Rear |
24 |
Blade Spacing – Front |
00:04:22 |
Blade Spacing – Rear |
10.5 in. (267 mm) |
Blade Size |
10.5 in. (267 mm) |
Blade Scrapers |
4.5 in. (114 mm) |
Blade Scraper Mount |
Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm |
Gang Spools – Front |
5.5 in. (140 mm) Diameter |
Gang Spools – Rear |
5.5 in. (140 mm) Diameter |
Gang Angle – Front |
14 or 18 Degrees |
Gang Angle – Rear |
12 or 16 Degrees |
Gang Shaft |
1.75 in. (44.5 mm) Round |
Number of Gang Bearings – Front |
8 |
Number of Gang Bearings – Rear |
6 |
Gang Bearing Type |
C-Cushion Trunnion Mount, Greaseable Triple Lip Seals |
Number of Shanks |
13 |
Shank Spacing |
15 in. (381 mm) |
Shank Mounts |
Integral Frame Mounts |
Point Load – Auto Reset |
1,750 lbs. (794 kg) |
Trip Height |
14 in. (356mm) |
Under Frame Clearance |
32 in. (813 mm) |
Chisel Shank Size |
1.25 in. x 2.5 in. (31.8 x 63.5 mm) |
Auto-Reset Ripper Shank Size |
1.25 in. x 3.0 in. (31.8 x 76.2 mm) |
Standard Points – Chisel Shank |
Reversible Point |
Standard Points – Auto-Reset Shank |
V-Cap Chrome Point |
Frame |
8 in. x 4 in. x 0.375 in. (203 x 102 x 9.5 mm) and 6 in. x 4 in. x 0.375 (153 x 102 x 9.5 mm) |
Frame Construction |
Laser Cut/Matchcut Components, Robotically Welded |
Transport Lift Axles |
5.5 in. (140 mm) with UHMW Maintenance Free Pivots |
Transport Axle Type |
Walking Tandems with Greaseable Pivots |
Tire Size |
(4) 380/55R x 16.5-12 |
Wheel Hubs |
8-Bolt |
Spindles |
3 in. (76.2 mm) Slip-In Spindles |
Hitch Type |
Self-Leveling with Manual Adjustment |
Hitch Category |
Cat. IV Single Lip with 2.25 (57.2 mm) Hole |
Machine Depth Control |
Single Point, Front Mounted |
Safety Warnings Lights and SMV Emblem |
Standard |
Safety Chain Kit |
Standard |
Adjustment Wrenches |
Standard |
Powder Coat Paint, Blue Sapphire |
Standard |
Rear Jack |
Standard, When Equipped with Chopper Reel |
Cat. III Single Lip Hitch Clevis (2 in. Hole) |
Optional |
Cat. IV Single Lip Hitch Clevis (2.25 in. Hole) |
Standard |
Cat. V Single Lip Hitch Clevis (3 in. Hole) |
Optional |
Shark Fin Point (Ripper Shanks) |
Optional |
2 in. Chrome Cap Point (Chisel Shanks) |
Optional |
Spare Tire & Wheel Assembly |
Optional |
Horsepower Requirements |
30 to 40 HP (22 to 30 kW) per Shank |